The placement of termite bait stations matters – too hot, too damp, or in the wrong place will ultimately lead to treatment failure. John Ralph, Managing Director of Sherwood Chemicals, explains how to ensure optimal performance.
When it comes to termite baiting, there is understandably a lot of focus on bait palatability – to get control, the termites need to eat the bait. However, they have to find the bait first. Ultimately, if you get the placement wrong, you’re unlikely to get feeding no matter how palatable the bait. At Sherwood Chemicals, we like to think our bait is pretty palatable, but we know getting bait placement right is critical to success, so here are our tips for optimal bait placement.
In-ground bait station placement
There are three key considerations regarding placement of in-ground baits: moisture, heat and chemicals. You may think you are restricted in your bait placement when installing stations around a building perimeter, but there is certainly some flexibility. Even in locations when there is no flexibility, understanding the potential microclimate at the site of each bait station placement is important in understanding the potential for termites to forage at that particular bait station during various times of the year.
Moisture is the number one driver of termite foraging patterns. When it comes to installing in-ground bait stations around a building in soil, ensure they are installed outside the drip line of the roof – inside the drip line the soil will be under the eaves and a lot drier. When choosing supplementary spots around the yard, also choose areas where the soil is likely to be moist, but don’t choose areas which are too wet or likely to flood, as termites tend to avoid these areas when waterlogged.
Heat has a significant impact on whether termites will enter and remain in a bait station. Although you may not always have a choice about placement, understanding its impact will help understand potential foraging patterns and hit rates. Soil, concrete, pavers, tiles and bitumen all have different heat retention properties, and their colour and how much sun they get impacts how much they heat up. The different termite species have slightly different temperature ranges in which they forage, but in Australia the foraging of most species will drop off significantly below 20°C. Similarly, they avoid or leave an area above 38°C… before they get cooked! The optimal range for termite foraging (assuming satisfactory humidity) would generally be 25-35°C.
Bait stations in core holes under hard surfaces, especially those dark in colour and in particular bitumen, can easily exceed 35°C when in full sun during the summer. On the flip side, these same locations will be warmer in the winter and may well be suitable for foraging termites when stations in soil are colder.
It is also important to consider whether there are any chemicals in the soil. This is particularly relevant if the house has previously had a soil treatment. Avoid placing bait stations in these areas – this applies to both repellent and ‘non-repellent’ chemicals. Placement of bait stations in lawn and garden areas may also be problematic. Both these areas may well get treated with insecticides, herbicides and even fungicides. The impact of insecticides is obvious, and although there is no data on the impact of herbicides and fungicides, termites can be sensitive to a wide range of chemicals.
Above-ground bait station placement
Optimal placement of above-ground bait stations to get quick feeding is aways a much-debated topic – do you place the bait station at the feeding front or over a mud tube? There is actually no published data to confirm if one location is better than the other. With Termatrix we always recommend placing the bait station at the feeding front, as that’s where termites are actively feeding. We find it better to use the mud tubes for monitoring activity. But sometimes of course, you don’t have much choice.
Try to avoid placement of bait stations that are likely to get cooling air from air-conditioners or be in full sun coming through the window. One tip to help with termites finding a newly installed station, which is popular in America, is to use a wet wick to link the feeding front to the bait inside the station. A wet wick can be any dense absorbent material soaked in water, pushing to the bait at one end and into the termite workings at the other.
Perhaps as important as choosing the site for placing above-ground bait, is the recommendation that bait stations should be placed at all sites of activity. Not only does this increase the chance of one bait station getting an early hit, but the building may be being attacked by more than one nest.
John Ralph, Managing Director, Sherwood Chemicals